508-521-6700
cmcsales@ppg.com
cmcsales@ppg.com
Iron/Silicone Casting Resin
Products
Rubber Sheet Microwave Absorbers
Carbon-Based Foam Microwave Absorbers
Honeycomb & High Power Microwave Absorbers
Low Loss Dielectric Stock Materials
Radomes & Radar-Absorbing Structures
Rigid and Castable Microwave Absorbers
IRON FILLED SILICONE CASTING RESIN FOR RF LOADS |
|
| C-RAM KRS (330-4) |  |
| C-RAM KRS is a series of two part liquid RTV silicone casting resin kits which can be used to mold wave guide terminations, attenuators, loads, RF gaskets, and other radar absorber parts. When cured, the material converts to a flexible, high temperature silicone rubber. Parts cast from C-RAM KRS have the same performance as parts machined from bars or sheets of C-RAM RGD-S (See Technical Bulletin 330-2). C-RAM KRS is available in the same grades as C-RAM RGD-S.
C-RAM KRS will cure and adhere to itself or to other silicone surfaces, however, it will release from most substrates. If adhesion is required, an application of C-PRIME 215 is recommended. |
|