508-521-6700
cmcsales@ppg.com
cmcsales@ppg.com
Iron/Epoxy Casting Resin
Products
Rubber Sheet Microwave Absorbers
Carbon-Based Foam Microwave Absorbers
Honeycomb & High Power Microwave Absorbers
Low Loss Dielectric Stock Materials
Radomes & Radar-Absorbing Structures
Rigid and Castable Microwave Absorbers
IRON FILLED EPOXY CASTING RESIN FOR RF LOADS |
|
| C-RAM KR (330-3) |  |
| C-RAM KR is a series of two-part liquid casting resin kits which can be used to mold waveguide terminations, attenuators, loads, and other RF absorbing parts. When cured into a solid, these parts have the same properties as parts machined from bars or blocks of C-RAM RGD (see Technical Bulletin 330-1). C-RAM KR is available in the same range of iron loadings as C-RAM RGD. In general, best performance is obtained at lower frequencies with high iron loadings, whereas low loadings work best at higher frequencies. Generally C-RAM KR-117 and -124 are the preferred materials below 20 GHz. | |